Powerwalker Battery pack for VFI 10000P_RT LCD Manual do Utilizador descarregar pdf (Página 19)

3. Pull the battery tray out using the plastic tabs and then remove

the battery tray.

Figure 3-11: Removing the Battery Tray

4. Install the PDU’s ears to the UPS

Figure 3-12. Install the PDU’s ears to the UPS

5. Select the proper holes in the rail for positioning the cabinet in

the desired location in the rack. Locate the rails at the bottom of

the 3U space allocated for the each UPS and EBM.

6. Install the sliding rails in the rack, then install the UPS in the

sliding rail.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 63 64

Sem comentários

Powerwalker Battery pack for VFI 10000P_RT LCD Manual do Utilizador Página 19